Share via email
Some fields are missing
Bürkert - Close to you
Office /1
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
 

EDIP - Efficient Device Integration Platform

The term “Industrie 4.0” stands for a new industrial age in which industrial processes can be carried out in a consistently digitized manner. We support this development with its device platform EDIP (Efficient Device Integration Platform) that enables intelligent networking down to the sensor and actuator level.

Print
The EDIP software tool
Type 8920
The Bürkert Communicator is the most important software component of the 'Efficient Device Integration Platform' (EDIP)

Benefits for you:
• Configuration, parameterisation and diagnosis of EDIP devices / networks
• Easy and comfortable mapping of cyclic values
• Graphical display of process values
• Firmware updates for devices
• Backup and restoring of device configurations
Mass Flow Management
Type 87418742 8746
Benefits for you:
• Nominal flow ranges from 0.010 lN/min to 80 lN/min
• High accuracy and repeatability
• Very fast response times
• Communication via fieldbus based on CANopen
Electromotive Process Control Valve
Type 3360 3361
Benefits for you:
• good and fast control
• weather, impact and vibration resistant design
• easy cleaning by its design according hygienic demands
• position controller und process controller available
AirLINE - the valve island optimised for process automation
Type 8652
Benefits for you:
• Compact design
• Easy diagnostics by LC display
• Process reliability through pneumatic functions
• Optimised for installation at the bottom of the control cabinet
FLOWave
Type 8098
Benefits for you:
• No parts in the measurement tube
• Conform to hygienic requirements
• Ideal for low conductivity or non conductive liquids
• Digital communication
• Compact, low weight and energy-efficient
Control head for decentralized automation of ELEMENT process valves
Type 8691
Benefits for you
• Contact-free inductive valve position registration (Teach function)
• Coloured illuminated status display
• Integrated control air routing
• Fieldbus AS-Interface, DeviceNet, IO-Link or büS (Bürkert System Bus)
• With ATEX II cat. 3G/D / IECEx approval
Digital electropneumatic Process Controller SideControl
Type 8793 Type 8792
Benefits for you
• Compact and robust design
• Easy Start-up using Tune function of the Positioner and Process controller
• Integrated diagnostic functions for valve monitoring
• Dynamic positioning system with no air consumption in controlled state
• PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)
Digital electropneumatic Positioner for the integrated mounting on process control valves
Type 8692 Type 8693
Benefits for you
• Compact, robust stainless Steel design
• Easy start-up by automatic X-Tune function
• Contact-free position sensor
• Integrated control air routing with spring chamber aeration
• PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus) demand
Online Analysis System
Type 8905
Benefits for you
• For analysis applications for drinking water and fresh water in industrial processes
• minimum sample water demand
• Modular sensor and electronic system: - up to 6 measurements in one housing - up to 30 analysis Sensor cubes in one büS system
• Prepared for fielbus connectivity, remote operation and remote maintenance
• MEMS technologies allows minimal footprint and minimum sample water demand
System Control Unit
Type ME43
Benefits for you:
• Gateway for Industrial Ethernet and Fieldbus standards
• Up to 128 input and 128 output variables can be assigned
• Easy integration in the process control system ensured through system specific device description files
• Graphical programming for automation of sub-systems

BENEFITS FOR YOU

  • Standardised interfaces for easy device integration
  • Graphical programming for individual process operations
  • ONE tool for commissioning, diagnosis and servicing
  • Reduced parametrisation for fast and easy start-up
  • Individual and flexible for short delivery times
  • Intuitive user-interface for easy and convenient operation

EDIP unifies and standardizes hardware, software and communication of Bürkert products. The modular design of the platform allows the adaptation of devices according to individual customer requirements enabling short delivery time. In addition, the customer benefits from a common interface across all products, which guarantees a comfortable operation and display concept, faster and simplified commissioning and easy transfer and backup of device settings.

The most recent developments with IT services, fieldbus systems and distributed control systems are changing process automation fundamentally. Bürkert’s response to this is the device platform EDIP. The “Efficient Device Integration Platform” provides the foundation for intelligent networking of the latest Bürkert products.

 

1. User interfaces

Intuitive and modular user interfaces (touchscreens, menus, device drivers, etc.) standardize the operation of all Bürkert EDIP devices.

2. CANopen communication standard

Communication between the EDIP devices takes place via an interface based on the industry standard CANopen. This digital interface is nothing other than CANopen with additional features.

3. Integrated adaptability

The integration of EDIP modules in plants based on other industry standards, such as PROFINET, Ethernet/IP, Modbus TCP, Profibus etc. is made possible by a modular concept.

4. Communicator – the universal tool

The Communicator is the software for the parametrization, configuration and service of process devices. It also features monitoring and diagnostic capabilities.

5. Decentralized intelligence in the field

The idea of EDIP is to equip sensors and actuators in the field with their own intelligence. Since autumn 2016 the Communicator will be expanded to include a graphical programming tool for the decentralized control of sub-systems.

application/pdf

Brochure - Digital process control - modular and flexible

The platform for intelligent networking: EDIP

Download Documents
application/pdf

Cabling Guide for EDIP

Guide for planning büS networks

Download Documents

Are you interested, please contact our sales team.

Bürkert presents new device platform EDIP

After mechanical production systems were established worldwide, followed by mass production and process automation, the concept of “Industry 4.0” stands for the consistent digital orientation of industrial processes. With the introduction of the new device platform EDIP (Efficient Device Integration Platform) Bürkert opens the door to intelligent networking of its products. This platform comprises numerous functions, compatible HMI devices and other innovative services to facilitate the system integration of new devices.

Press release

 

Products

Electromotive 2 way angle seat control valve

Electromotive 2 way angle seat control valve

Type 3360

  • good and fast control
  • weather, impact and vibration resistant design
  • easy cleaning by its design according hygienic demands
  • position controller und process controller available
Product page

Electromotive 2 way globe control valve

Electromotive 2 way globe control valve

Type 3361

  • High precise and fast flow control
  • Several Kvs value per port size due to removable valve seats
  • Weather, impact and vibration resistant design
  • Easy cleaning by its design according hygienic demands
  • Position controller und process controller available
Product page

FLOWave SAW flowmeter

FLOWave SAW flowmeter

Type 8098

  • Without any parts in the measuring tube
  • Conforms to hygienic requirements, CIP/SIP capable
  • Ideal for liquids with low or no conductivity
  • Digital communication, parameter setting via communicator, display and Wi-Fi
  • Compact, lightweight and low energy consumption
Product page

Online Analysis System

Online Analysis System

Type 8905

  • For analysis applications for drinking water and fresh water in industrial processes
  • Modular sensor and electronic system: - up to 6 measurements in one housing - up to 30 analysis sensor cubes in one büS system
  • Prepared for fielbus connectivity, remote operation and remote maintenance
  • MEMS technologies allows minimal footprint and minimum sample water demand
Product page

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8741

  • Nominal flow ranges from 0.010 lN/min to 160 lN/min
  • High accuracy and repeatability
  • Very fast response times
  • Easy device exchange through configuration memory
  • Optional: USP Class VI, FDA, EG 1935 conformity
Product page

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8742

  • Nominal flow ranges from 0.010 lN/min to 160 lN/min
  • High accuracy and repeatability with very fast response times
  • Easy device exchange through configuration memory
  • Communication via fieldbus based on CANopen
  • Optional: ATEX II Kat. 3G/D or USP Class VI, FDA, EG 1935 conformity
Product page

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for Gases

Type 8746

  • Nominal flow ranges from 20 lN/min up to 2500 lN/min
  • High accuracy and repeatability
  • Communication via fieldbus based on CANopen
  • Optional: ATEX II Cat. 3G/D
  • Electromagnetic and motor-driven valve actuation available
Product page

Bürkert Communicator

Bürkert Communicator

Type 8920

  • Configuration, parameterisation and diagnostics of EDIP devices / networks
  • Easy and comfortable mapping of cyclic values
  • Graphical display of process values
  • Firmware updates for devices
  • Backup and restoring of device configurations
Product page

AirLINE - the valve island optimised for process automation

AirLINE - the valve island optimised for process automation

Type 8652

  • Compact design
  • Easy diagnostics by LC display
  • Process reliability through pneumatic functions
  • Optimised for installation at the bottom of the control cabinet
Product page

Control head for decentralised automation of ELEMENT process valves

Control head for decentralised automation of ELEMENT process valves

Type 8691

  • Contact-free inductive valve position registration (Teach-In function)
  • Coloured illuminated status display
  • Integrated control air routing in the actuator
  • Fieldbus interface AS interface, DeviceNet, IO-Link or büS (Bürkert System Bus)
  • With ATEX II cat. 3G/D / IECEx approval
Product page

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves

Type 8692

  • Compact, robust stainless Steel design
  • Easy start-up by automatic X-Tune function
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)
Product page

Digital electropneumatic process controller for the integrated mounting on process control valves

Digital electropneumatic process controller for the integrated mounting on process control valves

Type 8693

  • Compact, robust stainless Steel design
  • Easy start-up by Tune function for position and process controller
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)
Product page

Digital electropneumatic Positioner SideControl

Digital electropneumatic Positioner SideControl

Type 8792

  • Compact and robust design
  • Easy to start using Tune function
  • Integrated diagnostic functions for valve monitoring
  • Dynamic positioning system with no air consumption in controlled state
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)
Product page

Digital electropneumatic Process Controller SideControl

Digital electropneumatic Process Controller SideControl

Type 8793

  • Compact and robust design
  • Easy Start-up using TUNE-Function of the Positioner and Process controller
  • Integrated diagnostic functions for valve monitoring
  • Dynamic positioning system with no air consumption in controlled state
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)
Product page

Fieldbus gateway

Fieldbus gateway

Type ME43

  • Gateway for industrial Ethernet and fieldbus standards
  • Up to 128 input and 128 output variables can be assigned
  • Easy integration in the process control level through system-specific device description files
  • Graphical programming for automation of sub-systems
Product page

I/O Modules, IP 20

I/O Modules, IP 20

Type ME44

  • I/O modules with configuration possibilities for a diverse range of applications
  • Integrated diagnosis possibilites like wire break, short circuit
  • Assembly and disassembly possible completely without tools
  • Color coded connectors reduce the risk of error during wiring
  • Removable terminal block with PUSH-IN spring connection
Product page

Contact Sales

Contact us...

My Comparison List