You are using an outdated browser. Unfortunately, this does not allow us to guarantee that our website can be used without any errors. The use of outdated browsers often leads to low speed and security problems, too. We recommend that you install a new version or an alternative browser to get the full functionality of our website.
The depiction of the products may differ from the actual specific design.
Please consider the technical attributes and Data Sheets.
Type Description
This flowmeter series measures especially large flow rates and uses the calorimetric measuring principle. A heated sensor element is cooled down by the gas flow. This cooling effect which depends on the flow velocity and the gas characteristics is the measure for the mass flow rate. This kind of mass flow measurement is independent of pressure and temperature.
The flowmeter can be used for monitoring air supplies, but also qualifies for measuring other gases after the corresponding calibration.
The display can be rotated by 180°. Moreover, there is a totaliser integrated which counts the gas volume flowing through the pipe. It can be reset by the console. The flowmeter’s pressure drop is negligibly low, the measurement works without any moving parts.
In combination with a solenoid control valve or an air operated process control valve, decentralised flow control loops up to DN 50 are possible.
Type 8008 is available in two variants: standard and heavy duty (with a robust aluminium die-cast electronics housing).
In the heavy duty variant, the sensor is encapsulated in stainless steel.
Thermal mass flow measurement
Integrated inlet and outlet pipes for flow conditioning
Pipe sizes up to 2"
Integrated display
Standard and heavy duty variant available
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.