You are using an outdated browser. Unfortunately, this does not allow us to guarantee that our website can be used without any errors. The use of outdated browsers often leads to low speed and security problems, too. We recommend that you install a new version or an alternative browser to get the full functionality of our website.
Type 8081
- Flowmeter for the continuous measurement of water
The depiction of the products may differ from the actual specific design.
Please consider the technical attributes and Data Sheets.
Type Description
The ultrasonic flowmeter Type 8081 is designed for the flow measurement of water which may also be slightly contaminated.
The device consists of a brass fitting with an integrated measuring tube and a transmitter. It is available in 5 variants: QN 0.6 DN 15, QN 1.5 DN 15, QN 2.5 DN 20, QN 3.5 DN 25, QN 6.0 DN 25 with flow rate ranges of 0.06 to 20 l/min (nominal flow rate 0.6 m3/h i.e. 10 l/min), 0.1 to 50 l/min (nominal flow rate 1.5 m3/h i.e. 25 l/min), from 0.16 to 82 l/min (nominal flow rate 2.5 m3/h i.e. 41 l/min), from 0.6 to 116 l/min (nominal flow rate 3.5 m3/h i.e. 58 l/min) and from 1 to 200 l/min (nominal flow rate 6.0 m3/h i.e. 100 l/min) respectively.
Each variant has either a pulse output or a pulse output and a 4…20 mA current output. The electrical connection is made via a 5-pin M12 male connector.
Combined with a controller and a control valve, the device can be used to set up a control loop.
Ultrasonic flowmeter using transit time method
Dynamic range ≥ 1:250
Low pressure drop
No flow-settling section necessary in the inlet or outlet
For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.